You are here:
9-10.28 series centrifugal ventilation fan
The 9-10.28 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation.
It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases.
The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.

We're here to help: Easy ways to get the answers you need.

SEND EMAIL SEND INQUIRY
Share with:
Description
Features
Specification
The 9-10.28 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation.
It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases.
The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.
The fan can also be used in cement kiln decomposition process, steel smelting and other special occasions use of high temperature fan (use heat resistant & high strength material).
The 9-10.28 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area.
application
Centrifugal fan is widely used in the cement industry, building materials industry, environmental protection industry, metallurgical industry, power industry projects such as large-scale dust collector, industrial boilers, ventilation systems, cooling.
Cement industry
Building materials industry
Environmental protection
Metallurgy
Electricity
Structure
Drive, we usually divide the fan into:
Direct connection
Coupling drive
Belt drive
In the process of choosing the fan, please select the appropriate fan according to the working conditions.

01

The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise.

02

In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians.

03

The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small.

04

The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing cooling device, which reduces the user's investment and maintenance workload.

05

When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.

06

The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.

07

Running test and vibration value detection after the production is completed, the fan operation is reliable.

Series no.

9-10.28 series

Feature selection

Normal

anti-corrosion

wear-resisting

High temperature

anti-explosion

Remarks

Performance

Impeller diameter

400-2000mm

 

Rotation speed

≤4000rpm

 

Pressure range

3807-37180Pa

 

Flow range

2743-334898㎥/h

 

Structure

Blade type

Forward

 

Impeller support

SWSI(Single Width, Single Inlet), DWDI(Double Width, Double Inlet), Overhung type

 

Lubrication method

Oil bath lubrication, grease lubrication, lubrication oil station

Can be specified

Cooling method

Air cooling, Water cooling, Oil cooling

Can be specified

Driven mode

Direct driven, Coupling driven, Belt driven

Can be specified

Gas composition

Gas temperature

Normal

Customer request

Customer request

≥250℃

Customer request

 

gas characteristic

Clean gas

Corrosive gas

Particulate dust

High temperature gas

Flammable gas, explosive gas

 

System configuration

Motor brand

Chinese famous brand, ABB, Siemens, WEG etc

Can be specified

Impeller

High quality carbon steel

FRP, Stainless steel, Rubber Lining

Wear-resistant layer or wear-resistant liner, ceramic patch

High temperature high quality alloy steel

FRP, Aluminum alloy

Can be specified

Air inlet cone

High quality carbon steel

FRP, Stainless steel, Rubber Lining

High quality carbon steel

High quality carbon steel

High quality carbon steel

Can be specified

Casing

High quality carbon steel

FRP, Stainless steel, Rubber Lining

High quality carbon steel

High quality carbon steel

High quality carbon steel

Can be specified

Air damper

High quality carbon steel

FRP, Stainless steel, Rubber Lining

High quality carbon steel

High quality carbon steel

High quality carbon steel

Can be specified

Main shaft

High strength carbon steel, Alloy structural steel

Can be specified

Bearing

ZWZ, SKF, FAG, NSK

Can be specified

Bearing housing

Cast iron

 

Foundation bolts

GB799-1988

 

Option parts

System base frame, Protective screening, Silencer, Inlet & Outlet flexible connections, Inlet & Outlet counter flange, Air damper, Electric actuator, Shock absorber, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibration sensor, Soft starter, Inverter, Special Electrical Motor, System monitoring Instrument.

Inquiry
* Your email:
* Your name:
Address:
Phone:
* Message:
send message